Products details
CLJG006 Bevel Gear Mechanism for High Voltage Earthing Switch
    Publish time 2019-03-07 16:08    
CLJG006 Bevel Gear Mechanism for High Voltage Earthing Switch

CLJG006 Bevel Gear Mechanism for High Voltage Earthing Switch

Product Introduction

1.      The CLJG006 bevel gear mechanism is used for manual operation, matched with JN22-40.5/31.5 indoor
high voltage earthing switch. It supports KYN61-40.5 switchgear and other switchgears.

2.      The rotation angle of operating shaft is 270°-90°(open-close.

3.      The operating mechanism is right operation by taking closing centerline as its actuator axis, shown as picture.
Left operation shall be assembled by manufacturer. Users shall install the left operation symmetrically according to the picture.

4.      When taking opening centerline as its actuator axis, right or left operation of main shaft can be installed with earthing switch,
and supplied by the manufacturer, users can still install it as right operation as shown in the picture, or symmetrically install
the left operation.

5.      V-shaped shaft hole is mounted on the spindle of the earthing switch in the mechanism. Please note that when fixing the
mechanism and the cabinet:

(a)    In the operating of rotation axis, the small bevel gear should be engaged at about 3-4 tooth of the big bevel gear.
Otherwise it will not meet the angle requirement.

(b)    When drilling 2-φ8 hole with the square core connecting rod of the mechanism, the handle at the front cabinet
should be the best position for easy operation.

(c)    It is recommended to use φ16*700 single-rod handle, for better actuating force.

Mechanism Type A

Installed on rear plate with static blade below the moving blade

Mechanism installation in closing state

Open by rotating CCW

Mechanism Type B

Installed on rear plate with static blade below the moving blade

Mechanism installation in closing state

Open by rotating CCW

Mechanism Type C

Installed on intermediate spacer with static blade below the moving blade

Mechanism installation in closing state

Open by rotating CW

Mechanism Type D

Installed on intermediate spacer with static blade below the moving blade

Mechanism installation in closing state

Open by rotating CW



Tel: 0086-574-88431113

Fax: 0086-574-88478873

Email: info@macwey.com

Web: www.macwey.com

Add: No.218 Weier Road,Chongshou

   Industrial Park, Cixi City

   (Ningbo), China

Home                          About us
Products                      Projects
SERVICE                         Join Us
Contact Us
Tel: 0086-574-88431113

Fax: 0086-574-88478873

Add: No.218 Weier Road,Chongshou Industrial

         Park, Cixi City(Ningbo), China

Email: info@macwey.com

Web: www.macwey.com

Follow us: